The Beechcraft Model 18 (or "Twin Beech", as it is also known) is a 6- to 11-seat,[1] twin-engined, low-wing, tailwheel light aircraft manufactured by the Beech Aircraft Corporation of Wichita, Kansas. Continuously produced from 1937 to November 1969 (over 32 years, a world record at the time), over 9,000 were built, making it one of the world's most widely used light aircraft. Sold worldwide as a civilian executive, utility, cargo aircraft, and passenger airliner on tailwheels, nosewheels, skis, or floats, it was also used as a military aircraft.[2][3][4]

Quick Facts Model 18, General information ...
Model 18
Thumb
A Model 18 over Little Gransden Airfield in 2019
General information
TypeTrainer, transport aircraft and utility aircraft
National originUnited States
ManufacturerBeech Aircraft Corporation
Primary usersUnited States Army Air Forces
Number built9,000+
History
Manufactured1937–1970
Introduction date1937
First flight15 January 1937
Close

During and after World War II, over 4,500 Beech 18s were used in military service—as light transport, light bomber (for China), aircrew trainer (for bombing, navigation, and gunnery), photo-reconnaissance, and "mother ship" for target drones—including United States Army Air Forces (USAAF) C-45 Expeditor, AT-7 Navigator, and AT-11 Kansan; and United States Navy (USN) UC-45J Navigator, SNB-1 Kansan, and others. In World War II, over 90% of USAAF bombardiers and navigators trained in these aircraft.[2][3][5]

In the early postwar era, the Beech 18 was the pre-eminent "business aircraft" and "feeder airliner". Besides carrying passengers, its civilian uses have included aerial spraying, sterile insect release, fish stocking, dry-ice cloud seeding, aerial firefighting, air-mail delivery, ambulance service, numerous movie productions, skydiving, freight, weapon- and drug-smuggling, engine testbed, skywriting, banner towing, and stunt aircraft. Many are privately owned, around the world, with 240 in the U.S. still on the FAA Aircraft Registry in August 2017.[2][4][6][7]

Design and development

Thumb
Beech 18 on floats in Manitoba, 1986
Thumb
Beechcraft AT-11 over the West Texas prairies, around 1944
Thumb
Private Beech H18 with the optional tricycle undercarriage visiting Lannion, France

By the late 1930s, Beechcraft management speculated that a demand would exist for a new design dubbed the Model 18, which would have a military application, and increased the main production facilities. The design was mainly conventional for the time, including twin radial engines, all-metal semimonocoque construction with fabric-covered control surfaces, and tailwheel undercarriage. Less conventional was the twin-tailfin configuration. The Model 18 can be mistaken for the larger Lockheed Electra series of airliners, which closely resemble it. Early production aircraft were powered either by two 330-hp (250-kW) Jacobs L-6s or 350-hp (260-kW) Wright R-760Es. The 450-hp (336-kW) Pratt & Whitney R-985 became the definitive engine from the prewar C18S onwards. The Beech 18 prototype first flew on 15 January 1937.[citation needed]

The aircraft has used a variety of engines and has had a number of airframe modifications to increase gross weight and speed. At least one aircraft was modified to a 600-hp (447-kW) Pratt & Whitney R-1340 powerplant configuration. With the added weight of about 200 lb (91 kg) per engine, the concept of a Model 18 fitted with R-1340 engines was deemed unsatisfactory due to the weakest structural area of the aircraft being the engine mounts. Nearly every airframe component has been modified.[citation needed]

In 1955, deliveries of the Model E18S commenced; the E18S featured a fuselage that was extended 6 in (150 mm) higher for more headroom in the passenger cabin. All later Beech 18s (sometimes called Super 18s) featured this taller fuselage, and some earlier models (including one AT-11) have been modified to this larger fuselage. The Model H18, introduced in 1963, featured optional tricycle undercarriage. Unusually, the undercarriage was developed for earlier-model aircraft under an STC by Volpar, and installed in H18s at the factory during manufacture. A total of 109 H18s was built with tricycle undercarriage, and another 240 earlier-model aircraft were modified with this.[8][9]

Construction of the Beechcraft Model 18 ended in 1970 with a final Model H18 going to Miyazaki Aviation College, Japan.[10] Through the years, 32 variations of the basic design had flown, over 200 improvement modification kits were developed, and almost 8,000 aircraft were built. In one case, the aircraft was modified to a triple tail, trigear, humpbacked configuration and appeared similar to a miniature Lockheed Constellation.[11] Another distinctive conversion was carried out by Pacific Airmotive as the PacAero Tradewind. This featured a lengthened nose to accommodate the tricycle nosewheel, and the Model 18's twin tailfins were replaced by a single fin.[12]

Operational history

Thumb
Beechcraft 18 on floats

Production got an early boost when Nationalist China paid the company US$750,000 for six M18R light bombers,[13] but by the time of the U.S. entry into World War II, only 39 Model 18s had been sold, of which 29 were for civilian customers.[8][14] Work began in earnest on a variant specifically for training United States Army Air Forces (USAAF) military pilots, bombardiers, and navigators. The effort resulted in the Army AT-7. Further development led to the AT-11 navigation trainer, C-45 military transport, and F-2 (the "F" standing for "Fotorecon", short for "photographic reconnaissance"). The United States Navy first adopted the Beech 18 as the JRB-1, equivalent to the F-2, followed by the JRB-2 transport; the JRB was initially named the Voyager, but this name did not enter common use, and JRBs were generally called Expeditors like their USAAF counterparts.[15] The first JRB-1 obtained by the Navy, bureau number (BuNo) 09771, was converted from the last civil Model 18 built before production was earmarked solely for the military for the duration of the war.[16] The Navy subsequently obtained more Model 18s as the JRB-3 (C-45B), JRB-4 (UC-45F), SNB-1 Kansan (AT-11), SNB-2 (AT-7), and SNB-2C (AT-7C).[17] Existing naval Twin Beeches were subsequently modified into the SNB-2H air ambulance, SNB-2P reconnaissance trainer, and SNB-3Q electronic countermeasures trainer.[18] The United States Coast Guard acquired seven JRB-4 and JRB-5 aircraft from the Navy between 1943 and 1947; they were primarily used as utility transports, with one aircraft later converted for aerial mapping, and another used for proficiency flying.[19][20]

After the war, the USAAF became the United States Air Force (USAF), and the USAF Strategic Air Command had Model 18 variants (AT-11 Kansans, C-45 Expeditors, F-2 Expeditors, and UC-45 Expeditors) from 1946 until 1951. In 1950, the Navy still had around 1,200 JRB and SNB aircraft in inventory.[18] From 1951 to 1955, the USAF had many of its aircraft remanufactured with new fuselages, wing center sections, and undercarriages to take advantage of the improvements to the civil models since the end of World War II. Eventually, 900 aircraft were remanufactured to be similar to the then-current Model D18S and given new designations, constructor's numbers, and Air Force serial numbers.[21] The USN had many of its surviving aircraft remanufactured as well, resulting in the JRB-6, the SNB-5, and SNB-5P.[22] The Coast Guard retired its JRBs in 1956 and sold most of them as surplus in 1959, but one was retained by the United States Coast Guard Reserve until at least 1972.[19][20] With the adoption of the 1962 United States Tri-Service aircraft designation system, the Navy's SNB-5 and SNB-5P became the TC-45J and RC-45J respectively, later becoming the UC-45J as their primary mission shifted from aircrew training to utility transport work.[23] The C-45 flew in USAF service until 1963, the USN retired its last UC-45J in 1972, while the U.S. Army flew its C-45s until 1976. In later years, the military called these aircraft "bug smashers" in reference to their extensive use supplying mandatory flight hours for desk-bound aviators in the Pentagon.[24]

Beech 18s were used extensively by Air America during the Vietnam War; initially more-or-less standard ex-military C-45 examples were used, but then the airline had 12 aircraft modified by Conrad Conversions in 1963 and 1964 to increase performance and load-carrying capacity. The modified aircraft were known as Conrad Ten-Twos, as the maximum takeoff weight (MTOW) was increased to 10,200 lb (4,600 kg).[25][26] The increase was achieved by several airframe modifications, including increased horizontal stabilizer angle-of-incidence, redesigned undercarriage doors, and aerodynamically improved wingtips. Air America then had Volpar convert 14 aircraft to turboprop power, fitted with Garrett AiResearch TPE-331 engines; modified aircraft were called Volpar Turbo Beeches, and also had a further increase in MTOW to 10,286 lb (4,666 kg).[25]

Spar problems

The wing spar of the Model 18 was fabricated by welding an assembly of tubular steel. The configuration of the tubes in combination with drilled holes from aftermarket STC modifications on some of these aircraft have allowed the spar to become susceptible to corrosion and cracking while in service.[27] This prompted the FAA to issue an Airworthiness Directive in 1975, mandating the fitting of a spar strap to some Model 18s. This led, in turn, to the retirement of a large number of STC-modified Model 18s when owners determined the aircraft were worth less than the cost of the modifications. The corrosion on unmodified spars was not a problem; it occurred due to the additional exposed surface area created through the STC hole-drilling process. Further requirements have been mandated by the FAA and other national airworthiness authorities, including regular removal of the spar strap to allow the strap to be checked for cracks and corrosion and the spar to be X-rayed. In Australia, the airworthiness authority has placed a life limit on the airframe, beyond which aircraft are not allowed to fly.[28][29][30]

Variants

Manufacturer models

Unless otherwise noted, the engines fitted are Pratt & Whitney R-985 radials.

Model 18A
First production model with seating for two pilots and seven or eight passengers, fitted with Wright R-760E-2 engines of 350 horsepower (260 kW), MTOW: 6,700 lb (3,000 kg)[31][32] Four built.[33]
  • Model S18A
Version of Model 18A capable of being fitted with skis or Edo 55-7170 floats; MTOW: 7,200 lb (3,300 kg)[32]
Model A18A
Version fitted with Wright R-760E-2 engines, MTOW: 7,500 lb (3,400 kg)[34]
  • Model SA18A
Seaplane version of Model A18A, MTOW: 7,170 lb (3,250 kg)[34]
Model 18B
Version powered with 285 hp (213 kW) Jacobs L-5 engines. Four built.[35][33]
  • Model S18B
Version of Model 18B capable of being fitted with skis or floats.
Model 18D
Variant with seating for two pilots and nine passengers, fitted with Jacobs L-6 engines of 330 horsepower (250 kW), MTOW: 7,200 lb (3,300 kg).[34] Twelve aircraft built.[33]
  • Model S18D
Version of Model 18D capable of being fitted with skis or Edo 55-7170 floats[citation needed], MTOW: 7,170 lb (3,250 kg)[14][failed verification][34]
Model A18D
Variant of 18D with MTOW increased by 300 lb (140 kg) to 7,500 lb (3,400 kg).[34]
  • Model SA18D
Seaplane version of Model A18D, but same MTOW as S18D.[34]
Model 18R
Model with Pratt and Whitney R-985-A1 engines with dual-stage blower for increased power at higher operating altitudes[citation needed], 420 horsepower (310 kW), seven built, one to Sweden as an air ambulance, six to Nationalist China as M18R light bombers[13][33]
Model 18S
Nine-passenger pre-World War II civil variant, powered by 450 hp (340 kW) served as basis for USAAF C-45C[1]
Model B18S
Nine-passenger pre-World War II civil variant, served as basis for USAAF F-2[1]
Model C18S
Variant of B18S with seating for eight passengers, and equipment and minor structural changes[36]
Model D18S
First post-World War II variant introduced in 1945, with seating for eight passengers and MTOW of 8,750 lb (3,970 kg), 1,035 built[37][38]
Model D18C
Variant with Continental R9-A engines of 525 horsepower (391 kW) and MTOW of 9,000 lb (4,100 kg), introduced in 1947, 31 built.[37][39]
Model E18S
Thumb
A 3-view line drawing of a Model E18S
Variant with redesigned wing and MTOW of 9,300 lb (4,200 kg); 403 built[37]
Model E18S-9700
Variant of E18S with MTOW of 9,700 lb (4,400 kg); 57 built[37]
Model G18S
Thumb
A Model G18S arriving at the 2016 RIAT, England
Superseded E18S, MTOW of 9,700 lb (4,400 kg); 155 built[37][38]
Model G18S-9150
Lightweight version of G18, MTOW of 9,150 lb (4,150 kg); one built[37][38]
Model H18
Last production version, fitted with optional tricycle undercarriage developed by Volpar and MTOW of 9,900 lb (4,500 kg); 149 built, of which 109 were manufactured with tricycle undercarriage[8][37][38]

Military versions

USAAC/USAAF designations

C-45
Six-seat staff transport based on C18S;[36] 11 built[40][41]
C-45A
Eight-seat utility transport based on C18S;[36] 20 built[40]
RC-45A
Redesignation of all surviving F-2, F-2A, and F-2B aircraft by the USAF in 1948
C-45B
Based on C18S, but with modified internal layout; 223 ordered, redesignated UC-45B in 1943[36][41] Equipped with a hatch in the cabin door for aerial photography.[42]
C-45C
Two Model 18S aircraft impressed into the USAAF, redesignated UC-45C in January 1943[1][31][43]
C-45D
Designation given to two AT-7 aircraft converted as passenger transports during manufacture, redesignated UC-45D in January 1943[43][44]
Thumb
C-45F at the Barksdale Global Power Museum
Thumb
C-45H/AT-7 CAF, Platte Valley Airpark, Hudson, Colorado, June 2007
Thumb
A cutaway view of a C-45H
C-45E
Designation given to two AT-7 and four AT-7B aircraft converted as passenger transports during manufacture, redesignated UC-45E in January 1943[43][44]
C-45F
Standardized seven-seat version based on C18S, with longer nose than preceding models;[36] 1,137 ordered, redesignated UC-45F[41]
C-45G
AT-7s and AT-11s remanufactured in the early 1950s for the USAF to similar standard as civil D18S with autopilot and R-985-AN-3 engines; 372 aircraft rebuilt[21][45]
TC-45G
Multiengine crew trainer variant of C-45G; AT-7s and AT-11s remanufactured in the early 1950s for the USAF to similar standard as civil D18S, 96 aircraft rebuilt[21][45]
C-45H
AT-7s and AT-11s remanufactured in the early 1950s for the USAF to similar standard as civil D18S, with no autopilot and R-985-AN-14B engines; 432 aircraft rebuilt[21][46]
TC-45H [37]
RC-45J [37]
In 1962, all surviving U.S. Navy SNB-5Ps were redesignated RC-45J[23]
TC-45J [37]
In 1962 all surviving U.S. Navy SNB-5s were redesignated TC-45J[23]
UC-45J [37]
Subsequent redesignation of RC-45J and TC-45J[23]
Thumb
AT-11 at the Barksdale Global Power Museum
Thumb
A 3-view line drawing of an AT-11
AT-7 Navigator
Navigation trainer based on C18S,[36] with an astrodome and positions for three students, powered by 450-hp Pratt & Whitney R-985-25 engines; 577 built[40][41]
AT-7A
Floatplane version of AT-7; six built[40]
AT-7B
Winterised AT-7; nine built[40]
AT-7C
Based on C18S[36] with R-985-AN3 engines; 549 built[40]
AT-11 Kansan
Bombing and gunnery trainer for USAAF derived from AT-7, fuselage had small, circular cabin windows, bombardier position in nose, and bomb bay; gunnery trainers were also fitted with two or three .30-caliber machine guns, early models (the first 150 built) had a single .30-cal AN-M2 in a Beechcraft-manufactured top turret, later models used a Crocker Wheeler twin .30-cal top turret, a bottom tunnel gun was used for tail gunner training, 1,582 built for USAAF orders, with 24 ordered by Netherlands repossessed by USAAF and used by the Royal Netherlands Military Flying School at Jackson, Mississippi.[47][48]
AT-11A
Conversion of AT-11 as navigation trainer; 36 converted[48]
CQ-3
Conversion of UC-45F, modified to act as drone control aircraft, redesignated as DC-45F in June 1948[citation needed]
Thumb
F-2s in Alaska, 1941
F-2
Photo-reconnaissance version based on B18[1]
F-2A
Improved version
F-2B

US Navy designations

Thumb
SNB-1 Kansan
Thumb
SNB-2 Navigator
JRB-1
Photographic aircraft, based on the C18S,[36] fitted with fairing over cockpit for improved visibility, 11 obtained,[49] at least one conversion from impressed civil B18S[16]
JRB-2
Light transport, based on the C18S;[36] 15 obtained,[49] at least one conversion from JRB-1,[50] some transferred from USAAF C-45A stocks[51]
JRB-3
Photographic version, similar to C-45B; 23 obtained,[49] some transferred from USAAF C-45B stocks[52]
JRB-4
Utility transport version, equivalent to UC-45F;[15] 328 obtained from USAAF[53][54][52][55]
JRB-6
Remanufactured JRB[23]
SNB-1
Similar to AT-11;[18] 110 built[55]
SNB-2
Navigation trainer similar to AT-7,[18] 299 built[55]
SNB-2C
Navigation trainer similar to AT-7C,[18] 375 built[55]
SNB-2H
Ambulance conversion[18]
SNB-2P
Photo-reconnaissance trainer conversion[18]
SNB-3Q
Electronic countermeasures trainer conversion[18]
SNB-5 [37]
Remanufactured SNB[23][54] or JRB[56]
SNB-5P [37]
Remanufactured SNB-2P[23]

RAF/RCAF Lend-lease designations

Expeditor I
C-45Bs supplied to the RAF under Lend-Lease
Expeditor II
C-45Fs supplied to the RAF and Royal Navy under Lend-Lease
Thumb
RAF C-45 Expeditor HB260 of the Allied Control Commission, Bulgaria, 1945.
Expeditor III
C-45Fs supplied to the RCAF under Lend-Lease

Post-war RCAF designations

C-45Ds delivered between 1951 and 1952[57]

Expeditor 3N
navigation trainer – 88 built[58]
Expeditor 3NM
navigational trainer that could be converted to a transport – 59 built[59]
Expeditor 3NMT
3NM converted to a transport aircraft – 67 built[60]
Expeditor 3NMT(Special)
navigation trainer/personnel transport – 19 built[61]
Expeditor 3TM
transport with fittings so it could be converted to a navigation trainer – 44 built[58]
Expeditor 3TM(Special)
modified RCAF Expeditors used overseas in conjunction with Project WPB6 – three built[62]

Canadian Armed Forces

CT-128 Expeditor
1968 redesignation of existing RCAF aircraft upon unification of the Canadian Armed Forces

Conversions

Thumb
PacAero Tradewind
Conrad 9800
Modification increasing the gross weight to 9,800 pounds with a single piece windshield [63]
Dumod I
Executive conversion with Volpar tricycle landing gear, new wing tips, enlarged fight deck and refurbished 6–7 seat cabin with larger windows. Originally named Infinité I. 37 converted by 1966.[11]
Dumod Liner
Stretched airliner conversion. Similar to Dumod I but with forward fuselage stretched by 6 feet 3 inches (1.91 m), allowing up to 15 passengers to be carried. Originally named Infinité II.[11]
Hamilton HA-1
conversion of a TC-45J aircraft
Hamilton Little Liner
Modification of D18S with aerodynamic improvements and new, retractable tailwheel, capable of carrying 11 seats[64]
Hamilton Westwind
Turboprop conversions with various engines
Thumb
Hamilton Westwind III conversion at an airfield in Tennessee
Hamilton Westwind II STD
Stretched conversion powered by two 840-hp PT6As, and with accommodation for up to 17 passengers[65]
Hamilton Westwind III
two 579-hp PT6A-20s or 630-hp PT6A-27s or 630-hp Lycoming LTS101s.
Hamilton Westwind IV
two 570-hp Lycoming LTP101s or 680-hp PT6A-28s or 750-hp PT6A-34s or 1020-hp PT6A-45s
PacAero Tradewind
Conversion of Beech D18S/C-45 to five- to 11-seat executive transport with single fin by Pacific Airmotive
Rausch Star 250
Built as C-45F 44-47231, this aircraft was re-manufactured at Wichita by Beech in 1952, to become TC-45G 51-11544. From 1959 Rausch Engineering Inc. of South San Francisco, California, converted N8186H to tricycle undercarriage, using forward retracting main gear from a P-51 and rearward-retracting nose-leg from a T-28, adding a 3 ft (0.91 m) nose extension, 4 ft (1.22 m) rear fuselage extension, re-roofed fuselage for increased headroom and enlarged cabin windows. The modifications did not obtain FAA certification despite 58 hours of flight testing, with the aircraft eventually being broken up at Antioch, CA, in 1978.[66]
SFERMA-Beechcraft PD.18S
Modification of Beech 18S powered by two Turboméca Bastan turboprops[67]
Volpar (Beechcraft) Model 18
Conversion of Model 18 with nosewheel undercarriage[68][69]
Volpar (Beechcraft) Super 18
Volpar (Beechcraft) Turbo 18
Beech Model 18s fitted with the Volpar MkIV tricycle undercarriage and powered by two 705-hp Garrett TPE331-1-101B turboprop engines, flat-rated to 605 hp (451 kW), driving Hartzell HC-B3TN-5 three-bladed, reversible-pitch, constant-speed feathering propellers[69]
Volpar (Beechcraft) Super Turbo 18
2x 705 hp (526 kW) Garrett TPE331
Volpar (Beechcraft) C-45G
C-45G aircraft modified with tricycle undercarriage
Volpar (Beechcraft) Turboliner
15-passenger version of the Turbo 18 with extended fuselage, powered by 2 705-hp Garrett TPE331-1-101Bs[70]
Volpar (Beechcraft) Turboliner II
Turboliners modified to meet SFAR 23[70]

Operators

Civil

As of 2012, the Beechcraft Model 18 remains popular with air charter companies and small feeder airlines worldwide.

Military

Thumb
Military Model 18 operators
Thumb
Argentine Navy C-45
Thumb
Beechcraft C-45 Expeditor in RCAF Air Transport Command markings
Thumb
C-45 as used by the Swiss Air Force for civilian aerial photography missions
Thumb
Beechcraft Model D18S of the Indonesian National Police
Thumb
UC-45J BuNo.89484 of the now defunct Military Air Transport Service
Thumb
ROC Air Force AT-11
Thumb
Beech 18/C-45 at the National Museum of the United States Air Force
Thumb
Beechcraft UC-45F in flight
Thumb
Japan Maritime Self-Defense Force SNB-4
 Argentina
 Bolivia
 Brazil
 Canada
 Chile
 Colombia
 Costa Rica
 Côte d'Ivoire[80]
 Cuba
 Dominican Republic
 Ecuador
 El Salvador
 France
 Guatemala
 Haiti
 Honduras
 Indonesia
 Iran
 Italy
 Japan
 Mexico
 Netherlands
 Nicaragua
 Niger
 Nigeria
 Paraguay
 Peru
 Philippines
 Portugal
 Somalia
 South Africa
 South Vietnam
 Spain
 Sri Lanka
 Sweden
  Switzerland
 Taiwan
 Thailand
 Tonga
 Turkey
 United Kingdom
 United States
 Uruguay
 Venezuela
 Zaire

Accidents and incidents

The Beechcraft Model 18 family has been involved in the following notable accidents and incidents:

  • 25 April 1951: Cubana de Aviación Flight 493, a Douglas DC-4 bound from Miami to Havana, registration CU-T188, collided with a U.S. Navy SNB-1, bureau number 39939, on a practice instrument approach to Naval Air Station Key West. The collision and ensuing crashes killed all 34 passengers and five crew aboard the DC-4 and all five crew aboard the SNB. The accident occurred at midday, weather was clear with unlimited visibility, and both flight crews had been cleared to fly under visual flight rules, being expected to "see and avoid" other aircraft; the student flying the SNB was wearing view-limiting goggles, but the other SNB crew were not, and were expected to keep watch. Ground witnesses said that neither aircraft took evasive action prior to the collision, and the Civil Aeronautics Board attributed the accident to the failure of both flight crews to see and avoid conflicting air traffic.[97]
  • 1967: Mohammed bin Awad bin Laden was killed in the crash of a Beechcraft 18 in Saudi Arabia.[98]
  • 10 December 1967: American soul music singer Otis Redding, four members of his backing band the Bar-Kays, the pilot, and another member of Redding's entourage were killed in the crash of Redding's H18, registration N390R, into Lake Monona on approach to Truax Field in Wisconsin. The National Transportation Safety Board (NTSB) was unable to determine the cause of the crash, noting that the left engine and propeller were not recovered.[99][100] Trumpet player Ben Cauley, the sole survivor of the crash, subsequently revived the Bar-Kays together with another band member who was aboard a different aircraft.[101]
  • 20 September 1973: American folk rock singer-songwriter Jim Croce, four members of his entourage, and the pilot were killed when their chartered E18S, registration N50JR, crashed into a tree shortly after takeoff from Natchitoches Regional Airport in Louisiana.[102][103][104] The NTSB attributed the accident to reduced visibility due to fog, and to physical impairment of the pilot, who had severe coronary artery disease and had run 3 mi (4.8 km) to the airport.[104] An investigation conducted for a lawsuit against the charter company attributed the accident solely to pilot error, citing his downwind takeoff into a "black hole" of severe darkness, causing him to experience spatial disorientation.[105]
  • 26 September 1978: Air Caribbean Flight 309, an air taxi flight by a D18S, registration N500L, crashed on approach to Isla Verde International Airport in Puerto Rico, killing the pilot and the five passengers aboard the aircraft and causing substantial property damage and injuries to bystanders on the ground. The pilot could not communicate with approach control and was following directions relayed by local tower controllers, who told the pilot to make a turn and maintain separation from a Lockheed L-1011 that was overtaking the flight, but the pilot did not turn, and the D18S passed underneath and very close to the L-1011. Both the NTSB and a U.S. District Court ruling attributed the crash to the D18S pilot's failure to correctly follow visual flight rules and air traffic control instructions to maintain separation from the much larger L-1011, causing a loss of aircraft control due to wake turbulence.[106][107] A contributing factor was the pilot's difficulties in communication with controllers.[106]
  • 4 July 1987: Ten people, including all then-current members of The Montana Band, were killed when the pilot of their chartered D18S, N132E,[108] failed to clear a hillside near Lakeside, Montana, while performing a flypast of the venue where the band had performed earlier.[109][110] The pilot performed an "abrupt" climb and performed a "hammerhead stall" maneuver, reversing direction and entering a dive. The accident was attributed to the pilot's poor judgment and failure to maintain altitude during unauthorized attempted aerobatics.[108]

Aircraft on display

Argentina

Australia

Belgium

Brazil

Canada

Chile

India

  • VT-CNY – D18S former aircraft of the Raja of Mayurbhanj and later sold to Coal India Limited- at the Hotel Mayfair Lagoon in Bhubaneswar, Orissa.[126]

Italy

Japan

  • 'JA5174' – H18 the final Beech 18 produced (c/n BA-765), delivered January 1970 to Miyazaki Aviation College, Japan. In use until 1988, now preserved at the College, Miyazaki Airport.[10]

Malta

Mexico

  • "ETL-1320" (S/N): 18 – UC-45J at the Museo Militar de Aviación.[citation needed]

Netherlands

New Zealand

Portugal

Spain

Turkey

United Kingdom

United States

Specifications (UC-45 Expeditor)

Thumb
3-view line drawing of the Beechcraft SNB-2 Navigator

Data from Jane's Fighting Aircraft of World War II.[153]

General characteristics

  • Crew: 2 pilots
  • Capacity: 6 passengers
  • Length: 34 ft 3 in (10.44 m)
  • Wingspan: 47 ft 8 in (14.53 m)
  • Height: 9 ft 9 in (2.97 m)
  • Wing area: 349 sq ft (32.4 m2)
  • Empty weight: 5,420 lb (2,458 kg)
  • Gross weight: 7,500 lb (3,402 kg)
  • Powerplant: 2 × Pratt & Whitney R-985-AN-1 "Wasp Junior" radial engines, 450 hp (340 kW) each

Performance

  • Maximum speed: 225 mph (362 km/h, 196 kn)
  • Range: 1,200 mi (1,900 km, 1,000 nmi) at 160 mph (260 km/h; 140 kn) and 5,000 ft (1,500 m)
  • Service ceiling: 26,000 ft (7,900 m)
  • Rate of climb: 1,850 ft/min (9.4 m/s)

See also

Aircraft of comparable role, configuration, and era

Related lists

References

Wikiwand in your browser!

Seamless Wikipedia browsing. On steroids.

Every time you click a link to Wikipedia, Wiktionary or Wikiquote in your browser's search results, it will show the modern Wikiwand interface.

Wikiwand extension is a five stars, simple, with minimum permission required to keep your browsing private, safe and transparent.