Alcor Duo
Type of aircraft From Wikipedia, the free encyclopedia
Type of aircraft From Wikipedia, the free encyclopedia
The Alcor Duo-4 was a high wing cabin aircraft, unusually powered by a pair of four cylinder straight engines mounted horizontally either side of the nose. After an accident it was rebuilt with six cylinder engines, becoming the Alcor Duo-6. The name Alcor derived from Allan Lockheed Corporation.
| |
| Duo-6 | |
| Role | four-six passenger aircraft |
| National origin | United States |
| Manufacturer | Alhambra Airport & Air Transport Co. |
| Designer | Allan H. Lockheed |
| First flight | 18 March 1931 |
Apart from their engine cowlings the Duo-4 and the rebuilt Duo-6 had identical structures. They had ply-covered cantilever high wings which tapered outwards both in plan and thickness, built around two box spars. Their ailerons were inset.[1][2][3]
Both were powered by air-cooled Menasco engines within carefully streamlined cowlings. The Menascos were mounted horizontally, head to head, on the nose of the fuselage so their propeller shafts were much closer together than on most conventional twin-engined aircraft, producing handling generally nearer to that of a single-engined design. On the Duo-4 the tips of the two-bladed propellers could be as little as 3 in (76 mm) apart. The Duo-4 had 125 hp (93 kW) Menasco C-4 and the Duo-6 215 hp (160 kW), supercharged Menasco C-6S engines.[2][4][5]
The rectangular cross-section, ply-covered fuselage had a Cr/Mo structure.[2][5] On the Duo-6 pilot and co-pilot sat side by side in an enclosed cockpit under the wing leading edge and the passenger cabin behind them, with two windows on each side, could be configured to hold four or six seats. Two separate baggage compartments provided a combined volume of 40 cu ft (1.1 m3). Entry was via a port side door.[2] There is less detail about the lower-powered Duo-4 but it is recorded as a five place aircraft.[3]
The fuselage tapered to a conventional tail of rounded profile and plan. Like the wing the tail had wooden structure and ply covering. Its tailplane, mounted at mid-fuselage, was in-flight adjustable for trim.[2][6]
The Duos had conventional, fixed, split axle landing gear with axles and drag struts mounted on the fuselage centreline. On each side a long, near-vertical leg, equipped with a hydraulic shock absorber, joined the outer end of the axle to the forward spar. The wheels, fitted with brakes, were enclosed under spats.[2]
The first flight of the Duo-4 was in 1930, piloted by Frank Clarke,[5] though there is some uncertainty about the Menasco sub-type used.[3] By 18 March 1931 Menasco C-4s were fitted when it was flown from Muroc Dry Lake by E.L. Remelin.[4][clarification needed] Later that month it was damaged by a wind gust and, though damage was slight, funding problems slowed the rebuild. Lockheed used the three year delay to fit C-6S engines which almost doubled the engine power. The first flight of the Duo-6 was in March 1934, piloted by Frank Clarke at Alhambra airport.[4]
Soon after, test flights were made with one propeller removed. The Duo-6 took off from an extended run, climbed at 400 ft/min (2.0 m/s) then performed a series of right- and left-handed wingovers, handling much like a single-engined aircraft despite the power asymmetry.[2]
In October 1934 U.S. regulations limited commercial use of single-engined passenger aircraft, offering the Duo-6 a market opportunity but it was damaged again in 1935 and Alcor concentrated on a new, low wing design with a similar engine layout, the Alcor C-6-1 Junior.
Data from Aero Digest (April 1935)[6]
General characteristics
Performance
Seamless Wikipedia browsing. On steroids.
Every time you click a link to Wikipedia, Wiktionary or Wikiquote in your browser's search results, it will show the modern Wikiwand interface.
Wikiwand extension is a five stars, simple, with minimum permission required to keep your browsing private, safe and transparent.
