Loading AI tools
From Wikipedia, the free encyclopedia
![]() | This template is used on approximately 726,000 pages, or roughly 1% of all pages. To avoid major disruption and server load, any changes should be tested in the template's /sandbox or /testcases subpages, or in your own user subpage. The tested changes can be added to this page in a single edit. Consider discussing changes on the talk page before implementing them. |
![]() | This template uses Lua: |
The location map template generates a location map as a composite image, consisting of a map and a location mark. Optionally, a label and caption can be added.
Map image files are not accessed directly, but by using an auxiliary map definition. For example, if the first unnamed parameter supplied to this template is Japan
, then this template uses the entry for Japan in Module:Location map/data/Japan if it exists, which contains the data needed to generate the composite image.
|caption=
causes the map to be displayed as a thumbnail image. If this parameter is not declared, the template will generate a default caption.|width=200px
will usually cause a very large map to be displayed. Use |width=200
.Decimal degrees | Degrees, minutes, seconds | With {{Coord}} (usually for infoboxes) |
Wikidata |
---|---|---|---|
{{Location map|{{{1}}}
|width =
|float =
|border =
|caption =
|alt =
|relief =
|AlternativeMap=
|overlay_image =
|label =
|label_size =
|position =
|background =
|mark =
|marksize =
|link =
|lat_deg =
|lon_deg =
}}
|
{{Location map|{{{1}}}
|width =
|float =
|border =
|caption =
|alt =
|relief =
|AlternativeMap=
|overlay_image =
|label =
|label_size =
|position =
|background =
|mark =
|marksize =
|link =
|lat_deg =
|lat_min =
|lat_sec =
|lat_dir =
|lon_deg =
|lon_min =
|lon_sec =
|lon_dir =
}}
|
{{Location map|{{{1}}}
|width =
|float =
|border =
|caption =
|alt =
|relief =
|AlternativeMap=
|overlay_image =
|label =
|label_size =
|position =
|background =
|mark =
|marksize =
|coordinates=
}}
|
{{Location map|{{{1}}}
|width =
|float =
|border =
|caption =
|alt =
|relief =
|AlternativeMap=
|overlay_image =
|label =
|label_size =
|position =
|background =
|mark =
|marksize =
}}
|
Parameter kind | Parameter | Description |
---|---|---|
Map display | {{{1}}} |
Required – use the name of the map as the first unnamed parameter; for example, specifying England will use the values for England in Module:Location map/data/England. See the examples below. Multiple maps can be shown by providing a list of map names separated by #. For multiple maps, the first is shown by default. A reader can select the others with radio buttons. |
width |
Determines the width of the map in pixels, overriding any default values; do not include px. For example, use |width=300 , not |width=300px . | |
default_width |
Determines the default width of the map in pixels, intended for use by templates, e.g. place infoboxes; the default value is 240. Do not include px. This value will be multiplied by the defaultscale parameter specified in individual map templates, if it exists, in order to achieve an appropriate size for vertical maps. For example, if |default_width=200 is given, a map of Thailand will be displayed with a width of 200×0.57=114 pixels (as specified in Module:Location map/data/Thailand). | |
max_width |
The maximum size of the map in pixels. Intended for use by templates, e.g. place infoboxes. Do not include px. | |
float |
Specifies the position of the map on the page; valid values are left , right , center and none . The default is right . | |
border |
Specifies the colour of the 1px map border; the default is lightgrey (see web colors). If set to none , no border will be generated. This parameter is seldom used. Special value: infobox . | |
caption |
The text of a caption to be displayed below the map; specifying a caption will cause the map to be displayed with a frame. If |caption= is defined but not assigned a value, the map will not be framed and no caption will be displayed. If |caption= is not defined, the map will not be framed and a default caption will be generated. The default caption is created from the |label= parameter (or the current page name if |label= not defined) and the |name= parameter from the map definition template. Multiple captions can be shown when separated by ## (that's two). | |
alt |
Alt text for map; used by screen readers. See WP:ALT. | |
relief |
Any non-blank value (1 , yes , etc.) will cause the template to display the map specified in the map definition template as image1 , which is usually a relief map; see the example at Location map+/relief. Other numerical values such as 2 or 3 will display image2 or image3 , if those images are defined. | |
AlternativeMap |
Allows the use of an alternative map; the image must have the same edge coordinates as the location map template. See the example at Location map+/AlternativeMap. | |
overlay_image |
Allows an overlay to be superimposed on the map; this parameter is seldom used. See the example at Location map+/overlay. | |
Label and mark parameters[note 1] | label |
The text of the label to display next to the identifying mark; a wikilink can be used. You can enclose the label inside of {{nowrap}} if you want to make sure that it stays on a single line. The default (if not specified) is no label, just the marker. |
label_size |
The font size to use for the label, given as a percentage of the normal font size (<100=smaller, >100=larger); the default size is 90. Do not include %. For example, use |label_size=80 , not |label_size=80% . If set to 0 , the label is only displayed when the user hovers over the mark. | |
label_width |
The width to use for the label, given as an em size; the default width is 6. Do not include em. For example, use |label_width=7 , not |label_width=7em . | |
position |
The position of the label relative to the identifying mark; valid values are left , right , top ,bottom and none . This defaults to either left or right , depending on the coordinates of the marker and its position relative to the right border of the map image. When |position=none , any defined label will not be displayed with the mark, but it will be used to create the default caption. | |
background |
The background colour to use for the label; see Web colors. The default is no background colour, which shows the map image behind the label. | |
mark |
The name of an image file to display as the identifying mark; the default is Red pog.svg (![]() | |
marksize |
The size of the identifying mark in pixels; the default is 8. Do not include px. For example, use |marksize=10 , not |marksize=10px . | |
link |
Specifies a wikilink which can be followed if the reader clicks on the identifying mark; do not include [[]] (double square brackets). For example, use |link=Yellowstone National Park , not |link=[[Yellowstone National Park]] . | |
coordinates |
The coordinates in {{Coord}} format. Whilst not recommended, coordinates can also be entered in decimal degrees (e.g. 48.067°N 12.863°E ); you shouldn't need to do this, though. | |
lat_deg |
The degrees of latitude; this value can be specified using decimal degrees, and when this format is used, minutes and seconds should not be specified. | |
lat_min |
The minutes of latitude. | |
lat_sec |
The seconds of latitude; not usually necessary. | |
lat_dir |
N for north (default value), or S for south of the Equator; other values will be disregarded. Not required if using signed decimal degrees, i.e. negative numbers for southern latitude. | |
lon_deg |
The degrees of longitude; this value can be specified using decimal degrees, and when this format is used, minutes and seconds should not be specified. | |
lon_min |
The minutes of longitude. | |
lon_sec |
The seconds of longitude; not usually necessary. | |
lon_dir |
E for east (default value), or W for west of the Prime Meridian; other values will be disregarded. Not required if using signed decimal degrees, i.e. negative numbers for western longitude. |
There are over 1,000 maps available. To find other maps:
Note: when a label is not specified, the default caption is "Page name (Map name)", so if this example was viewed on a page named Pag, the default caption would be "Pag (Croatia)". Likewise, on a page named Pag (town), the default caption would be "Pag (town) (Croatia)".
{{Location map|Croatia
|alt = Pag is on an island.
|lat_deg = 44.44
|lon_deg = 15.05
}}
Note: when a label is specified, the default caption is "Label text (Map name)", seen as "Pag (Croatia)" in this example.
{{Location map|Croatia
|width = 200
|float = right
|alt = Pag is on an island.
|label = Pag
|position = right
|mark = Green pog.svg <!--green dot-->
|lat_deg = 44 |lat_min = 26 <!-- default: lat_dir = N -->
|lon_deg = 15 |lon_min = 3 <!-- default: lon_dir = E -->
}}
When |position=none
, the label text is not displayed next to the mark, but is still used in the default caption and default alt text.
{{Location map|Croatia
|width = 200
|float = right
|label = Pag
|position = none
|mark = Green pog.svg <!--green dot-->
|lat_deg = 44 |lat_min = 26 <!-- default: lat_dir = N -->
|lon_deg = 15 |lon_min = 3 <!-- default: lon_dir = E -->
}}
{{Location map|Croatia
|width = 200
|float = right
|caption =
|alt = Rimini in Italy (outside the map)
|lat_deg = 44.05
|lon_deg = 12.57 <!--outside maps left border at 13.1-->
|outside = 1 <!--we're aware the point is outside the map, so suppress the warning category-->
|label = Rimini
|position = right
}}
{{Location map|Italy
|width = 200
|float = right
|caption = Location of Rimini in Italy
|alt = Map of Italy with mark showing location of Rimini
|label = Rimini
|label_size = 130 <!--130% of normal size-->
|position = bottom
|background = #ffaa00aa <!--with opacity-->
|mark = Orange_pog.svg
|marksize = 12 <!--size in pixels-->
|lat_deg = 44.05
|lon_deg = 12.57
}}
{{Location map|Italy
|AlternativeMap = Italy relief location map.jpg
|width = 200
|float = right
|caption = Location of Rome in Italy
|alt = Map of Italy with mark showing location of Rome
|label = Rome
|lat_deg = 41.9
|lon_deg = 12.5
}}
When |relief=
has no value, the module defined image
is shown. Numerical values 1
to 99
will show image1
to image99
. Any other value will show image1
.
The following example also demonstrates automatic positioning of label to the left due to the far right position of the mark.
{{Location map|Africa
|relief = yes
|caption = Location of [[Beyla]] in Africa
|label = Bandar Beyla
|label_width = 9
|lat = 9.5
|long = 50.8
}}
The second relief map from Module:Location map/data/Africa can be used by setting |relief=2
{{Location map|Africa
|relief = 2
|caption = Location of Beyla on a simulated [[land cover]] map of Africa
|label = Bandar Beyla
|label_width = 9
|lat = 9.5
|long = 50.8
}}
{{Location map|UK Scotland#UK
|relief = 1
|width = 180
|float = right
|caption = Lockerbie in Scotland, UK
|alt = Lockerbie is in southern Scotland.
|label = Lockerbie
|mark = Blue_pog.svg
|marksize = 9
|lat_deg = 55 |lat_min = 07 |lat_sec = 16 |lat_dir = N
|lon_deg = 03 |lon_min = 21 |lon_sec = 19 |lon_dir = W
}}
Template such as Template:Infobox settlement display the selectable radio buttons underneath the location map. The following code utilizes Template:Stack to achieve a similar result.
{{stack begin}}
<div style="background:white; border:1px solid rgb(0, 0, 0); padding:2px; align:center; text-align:left; width:260; position:relative;">
{{Location map|Poland#Podlaskie Voivodeship#Europe#Baltic Sea#NATO
|relief = Yes
|width = 260
|default_width =
|float =
|caption = The [[Suwałki Gap]] is named after the city of [[Suwałki]] (marked by the blue dot).
|alt = The city of Suwałki
|label = Suwałki
|link = Suwałki
|position =
|mark = Blue_pog.svg
|marksize = 6
|coordinates = {{coord|54|05|56|N|22|55|43|E|region:PL_type:city|display=inline,title}}
|border = infobox
|background =
}}
</div>
{{stack end}}
Module:Location map/data/Russia Chukotka Autonomous Okrug is an example of a map that crosses the 180th meridian. To the west of 180° in the Eastern Hemisphere is Pevek, at 170°17′E longitude. To the east of 180° in the Western Hemisphere is Uelen, at 169°48′W longitude.
{{Location map
| Russia Chukotka Autonomous Okrug
| float = right
| width = 250
| caption = [[Chukotka Autonomous Okrug]]
| label = Pevek
| position = bottom
| background = lightgreen
| mark = Locator_Dot.png
| marksize = 7
| coordinates = {{coord|69|42|N|170|17|E}}
}}
{{Location map
| Russia Chukotka Autonomous Okrug
| float = right
| width = 250
| caption = [[Chukotka Autonomous Okrug]]
| label = Uelen
| position = bottom
| background = lightgreen
| mark = Locator_Dot.png
| marksize = 7
| coordinates = {{coord|66|09|N|169|48|W}}
}}
TemplateData documentation used by VisualEditor and other tools |
---|
See a monthly parameter usage report for Template:Location map in articles based on its TemplateData.
TemplateData for Location map |
For similar examples, see the documentation at Template:Location map+, as well as:
|relief=
parameter|AlternativeMap=
parameter|overlay_image=
parameterLocation map templates
Other templates
Infoboxes incorporating Location map – any country or region
Infoboxes incorporating Location map – specific countries or regions