Loading AI tools
Award From Wikipedia, the free encyclopedia
The Parachutist Badge, also commonly referred to as "Jump Wings", is a military badge of the United States Armed Forces. Some services, such as the Marine Corps, officially refer to it as an insignia instead of a badge. The United States Space Force and United States Coast Guard are the only branches that do not award the Parachutist Badge, but their members are authorized to receive the Parachutist Badges of other services in accordance with their prescribed requirements. The DoD military services are all awarded the same Military Parachutist Badge. The U.S. Army and U.S. Air Force issue the same Senior and Master Parachutist Badges while the U.S. Navy and U.S. Marine Corps issue the Navy and Marine Corps Parachutist Insignia to advanced parachutists. The majority of the services earn their Military Parachutist Badge through the U.S. Army Airborne School.
Parachutist Badge | |
---|---|
![]() Military Parachutist Badge | |
Type | Badge |
Awarded for | Airborne training course |
Presented by | United States Armed Forces |
Status | Currently awarded |
Last awarded | Currently awarded |
Total awarded posthumously | 86 |
Additional grades of U.S. military parachutist badges | |
Army Precedence | |
Next (higher) | Expert Field Medical Badge |
Next (lower) | Parachute Rigger Badge[1] |
The Army's Parachutist Badge is awarded to all military personnel of any service who complete the US Army Basic Airborne Course at Fort Moore, Georgia. It signifies that the soldier is a trained military parachutist, and is qualified to participate in airborne operations. The badge and its sew-on equivalent may be worn on the Army Combat Uniform (ACU).[2]
The original Army Parachutist Badge was designed in 1941 by Captain (later Lieutenant General) William P. Yarborough and approved by the Department of War in March of that year. The Parachutist Badge replaced the "Parachutist Patch" which had previously been worn as a large patch on the side of a paratrooper's garrison cap. LTG Yarborough also designed the Senior and Master Parachutist Badges and the addition of stars to portray the number of combat jumps. The airborne background trimming that is worn behind the badge of those assigned to airborne units is also a contribution of Yarborough.[3]
The Senior and Master Parachutist Badges were authorized in 1949.[4]
To be eligible for award of the Parachutist Badge, a person must have completed the Basic Airborne Course of the Airborne School of the United States Army Infantry School at Fort Moore, Georgia. To graduate, a student must complete the three-phase course consisting of a ground phase, a tower phase, and a jump phase. By the end of the course, a student will have completed five jumps in varying jump configurations, from a "Hollywood" jump all the way to a full combat load jump at night.[1]
To be eligible for the Senior Parachutist Badge, a person must have been rated excellent in character and efficiency and have met the following requirements:
To be eligible for the Master Parachutist Badge, a person must have been rated excellent in character and efficiency and have met the following requirements:
The 25 combat equipment jumps necessary to qualify for the Master Parachutist Badge must be from a static line.[1]
The master parachutist badge is 1+1⁄2 inches (38 mm) wide at the widest part of the wings and 1+13⁄64 inches (31 mm) from the top of the wreath to the bottom of the parachute where the risers meet in a point.
Soldiers assigned to Army units on airborne status wear a cloth oval, known as airborne background trimming, underneath their Parachutist Badge, which are uniquely designed for each airborne unit.[5][6] This distinguishes a parachute-qualified soldier serving in a unit on active jump status, called a "Paratrooper," from a parachutist serving in a non-airborne unit. The original airborne background trimming was also a contribution of Captain Yarborough, who attempted to address a concern that the Parachutist Badge was too small and did not stand out on the uniform.[5] Today, each unit's airborne background trimming design is created and approved by The Institute of Heraldry, which evaluates unit lineage, military heraldry, and proposed designs by the requesting unit.[7]
A parachutist who completes an airborne jump into a combat zone is authorized to wear a combat jump device on their Parachutist Badge, turning it into a Combat Parachutist Badge. The device consists of a star or arrangements of stars, indicating the number of combat jumps (up to five) conducted by the paratrooper.[8] The use of stars as combat jump devices gained official approval after the 1983 invasion of Grenada (Operation Urgent Fury). The stars are awarded as follows:[9][10]
1 combat jump | A bronze star on the shroud lines |
2 combat jumps | A bronze star on each wing |
3 combat jumps | A bronze star on each wing and one on the shroud lines |
4 combat jumps | Two bronze stars on each wing |
5 + combat jumps | A large gold star on the shroud lines |
Like the Army, the Air Force issues the same parachutist badges in the same three degrees (Basic, Senior, & Master) but have different criteria for the awarding of these badges. The level of degree is determined by the number of jumps the wearer has successfully completed, years of service on jump status, and other requirements as specified by AFI 11-402, Aviation and Parachutist Service, Aeronautical Ratings and Badges.[11] Additionally Airmen who have earned the Parachutist Badge while serving as members of a sister branch then transferred to the U.S. Air Force are allowed to continue wear of the badge without having to requalify.[12]
In 1956 the Air Force began issuing a unique Basic, Senior, and Master Parachutist Badges. These parachutist badges were modeled after the Air Force's Medical Badges. Due to popular demand, the Air Force decided to revert to issuing the Army style parachutist badges in 1963.[13]
The Parachutist Badge may be awarded following completion of basic parachute training through a designated Air Force Air-Ground Training Program. Air Force personnel generally earn the Military Parachutist Badge either through the Army's Airborne School at Fort Benning, or the United States Air Force Academy's AM-490 freefall parachute training course taught by AETC's 98th Flying Training Squadron.[11]
The Senior Parachutist Badge consists of the Military Parachutist Badge with a star atop the parachute. Awarded for 30 static line jumps with a minimum of 24 months of cumulative time on jump status. The 30 jumps must include:[14]
The Master Parachutist Insignia consists of the Senior Parachutist Badge with a star centered within the wreath. Awarded for 65 static line jumps with a minimum of 36 months of cumulative time on jump status. The 65 jumps must include:[14]
The United States Navy and Marine Corps issue parachutist insignia in two degrees: the Military Parachutist Badge, also called the Basic Parachutist Insignia (the same badge that's awarded to all DoD military services), and the Naval or Navy/Marine Corps Parachutist Insignia. Parachutist insignia is available to personnel who perform qualifying airborne jumps as a:[15][16]
Training is accomplished by successful completion of the prescribed course of instruction while attending the:[15][16]
The right to wear the Military Parachutist Insignia is based on the completion of prescribed training defined in OPNAVINST 3501.225 and MCO 3120.11:[16] The Marine Corps refers to it as the Basic Parachutist Insignia.[16]
When a US Navy enlisted member initially qualifies as a static line parachutist, an entry shall be made on NAVPERS 1070/613 (commonly referred to as a "Page 13" entry) of the US Navy enlisted service record indicating the date of qualification, type(s) of aircraft in which qualified, and unit at which the training was received. Navy enlisted members are authorized the parachutist (PJ) designator added to their rating.[16]
A qualified static-line parachute jumper who successfully completes the prescribed program of instruction while attending a formal, interservice training facility including a minimum of 10 military free-fall parachute jumps, at least 2 of which must have been conducted carrying full combat equipment (1 day/1 night), may qualify. Navy enlisted members are authorized the military free-fall parachutist (FPJ) designator added to their rating.[16]
When a US Navy officer initially qualifies as a static line parachutist, the additional qualification designator (AQD) of BT1 will be entered into the officer's record by their detailer (NAVPERS). Free-fall qualification will result in an AQD of BT2.[16]
For both Static Line and Military Free Fall Parachutist qualified personnel, a service record entry shall also indicate whether or not the member is HALO-qualified.[16]
The Military Parachutist Badge is a prerequisite for the Special Warfare Badge since parachutist training is an integral part of the Navy's Basic Underwater Demolition/SEAL (BUD/S) program. SEAL personnel generally do not wear the Basic badge once they earn their Special Warfare insignia, but will wear their Naval Parachutist Badge in addition to the Special Warfare Badge, the latter nicknamed the "Budweiser" badge. Navy EOD technicians are generally also jump qualified with a number of them also being qualified in military free-fall (HALO/HAHO). Currently, due to a recent change, newly pinned Navy EOD technicians are required to attend the U.S. Army's Basic Airborne School upon graduation. As well, a number of SWCC personnel earn the Military Parachutist Badge in conjunction with their assignment to a Special Boat Team detachment that uses the Maritime Craft Air Delivery System (MCADS). This enables them to drop small watercraft and their crews from C-130 aircraft.[16]
The Naval or Navy/Marine Corps Parachutist Insignia (originally issued as U.S. Navy Certified Parachute Rigger wings) is a gold-colored embroidered or metal insignia depicting an open parachute with outstretched wings. It is authorized for officers and enlisted personnel who were awarded the Military Parachutist Badge and, under competent orders, have completed at least five more static-line or P3 jumps, including: a combat equipment day jump, two combat equipment night jumps, and employ at least two types of military aircraft.[16]
The original Certified Parachute Rigger badge was designed by American Insignia Company in 1942 for graduates of the U.S. Navy Parachute Rigger School. During WWII, U.S. Marine Corps paratroopers issued the silver U.S. Military Parachutist Badge commonly wore—against regulations—the gold "Rigger wings" because the believed it looked better on their uniform.[17] In July 1963, Commander of United States Marine Corps Force Reconnaissance Bruce F. Meyers asked Chief of Naval Operations Admiral George W. Anderson Jr. via Marine Corps Commandant General David M. Shoup to officially make the Navy Parachute Rigger Badge the Naval Parachutist Badge for the Navy and Marine Corps. The request was approved by Anderson on 12 July 1963 in BuPers Notice 1020.[18] Originally, the badge was worn upon graduation from Navy PR school, but since 1963 being a certified parachute rigger, survival equipmentman, and graduate of the U.S. Navy Parachute Rigger is no longer a requirement to earn the badge. Currently, the Naval Parachutist Insignia only requires the completion of the minimum five additional jumps in a jump billet, but service members can request to attend Navy Parachute Rigger School for further training and specialized occupational duties such as Special Operations Parachute Rigger (SOPR) who work within Navy SEAL teams and Naval Special Warfare and Explosive Ordnance Disposal (EOD) units throughout the world.
Qualified Army and Air Force personnel may go on to earn the Military Freefall Parachutist Badge in special operations training for High Altitude Low Opening (HALO) and High Altitude High Opening (HAHO) jumps. HALO/HAHO training is conducted by the John F. Kennedy Special Warfare Center and School of the US Army Special Operations Command, on behalf of the US Special Operations Command. It is awarded in two degrees: Basic and Master. To earn the basic badge, the jumper must have graduated from Army Airborne School and the Military Free-Fall Parachutist Course.[19] To earn the master badge, jumpers must have graduated from Army Airborne School, Army Jumpmaster School, Military Free-Fall Parachutist Course, and the Military Free-Fall Jumpmaster Course.[20]
As with the Army's Parachutist Badges, Army parachutists that have earned one of the Military Freefall Parachutist Badges are also eligible to earn Combat Jump Devices.[1][10][21]
Seamless Wikipedia browsing. On steroids.
Every time you click a link to Wikipedia, Wiktionary or Wikiquote in your browser's search results, it will show the modern Wikiwand interface.
Wikiwand extension is a five stars, simple, with minimum permission required to keep your browsing private, safe and transparent.