Loading AI tools
Chemical compound From Wikipedia, the free encyclopedia
Mercury sulfide, or mercury(II) sulfide is a chemical compound composed of the chemical elements mercury and sulfur. It is represented by the chemical formula HgS. It is virtually insoluble in water.[4]
![]() | |
Names | |
---|---|
IUPAC name
Mercury sulfide | |
Other names | |
Identifiers | |
3D model (JSmol) |
|
ECHA InfoCard | 100.014.270 |
EC Number |
|
PubChem CID |
|
UNII | |
UN number | 2025 |
CompTox Dashboard (EPA) |
|
| |
| |
Properties | |
HgS | |
Molar mass | 232.66 g/mol |
Density | 8.10 g/cm3 |
Melting point | 580 °C (1,076 °F; 853 K) decomposes |
insoluble | |
Band gap | 2.1 eV (direct, α-HgS) [1] |
−55.4·10−6 cm3/mol | |
Refractive index (nD) |
w=2.905, e=3.256, bire=0.3510 (α-HgS) [2] |
Thermochemistry | |
Std molar entropy (S⦵298) |
78 J·mol−1·K−1[3] |
Std enthalpy of formation (ΔfH⦵298) |
−58 kJ·mol−1[3] |
Hazards | |
GHS labelling: | |
![]() ![]() ![]() ![]() | |
Danger | |
H300, H310, H317, H330, H373, H410 | |
P261, P272, P280, P302+P352, P321, P333+P313, P363, P501 | |
NFPA 704 (fire diamond) | |
Flash point | Non-flammable |
Safety data sheet (SDS) | Fisher Scientific |
Related compounds | |
Other anions |
Mercury oxide mercury selenide mercury telluride |
Other cations |
Zinc sulfide cadmium sulfide |
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
|
HgS is dimorphic with two crystal forms:
β-HgS precipitates as a black solid when Hg(II) salts are treated with H2S. The reaction is conveniently conducted with an acetic acid solution of mercury(II) acetate. With gentle heating of the slurry, the black polymorph converts to the red form.[6] β-HgS is unreactive to all but concentrated acids.[4]
Mercury is produced from the cinnabar ore by roasting in air and condensing the vapour.[4]
When α-HgS is used as a red pigment, it is known as cinnabar. The tendency of cinnabar to darken has been ascribed to conversion from red α-HgS to black β-HgS. However β-HgS was not detected at excavations in Pompeii, where originally red walls darkened, and was attributed to the formation of Hg-Cl compounds (e.g., corderoite, calomel, and terlinguaite) and calcium sulfate, gypsum.[7]
As the mercury cell as used in the chlor-alkali industry (Castner–Kellner process) is being phased out over concerns over mercury emissions, the metallic mercury from these setups is converted into mercury sulfide for underground storage.
With a band gap of 2.1 eV and its stability, it is possible to be used as photoelectrochemical cell.[8]