Liñán's equation
Type of ordinary differential equation / From Wikipedia, the free encyclopedia
Dear Wikiwand AI, let's keep it short by simply answering these key questions:
Can you list the top facts and stats about Liñán's equation?
Summarize this article for a 10 year old
In the study of diffusion flame, Liñán's equation is a second-order nonlinear ordinary differential equation which describes the inner structure of the diffusion flame, first derived by Amable Liñán in 1974.[1] The equation reads as
subjected to the boundary conditions
- :&\quad {\frac {dy}{d\zeta }}=-1,\\\zeta \rightarrow +\infty :&\quad {\frac {dy}{d\zeta }}=+1\end{aligned}}}
where is the reduced or rescaled Damköhler number and
is the ratio of excess heat conducted to one side of the reaction sheet to the total heat generated in the reaction zone. If
, more heat is transported to the oxidizer side, thereby reducing the reaction rate on the oxidizer side (since reaction rate depends on the temperature) and consequently greater amount of fuel will be leaked into the oxidizer side. Whereas, if
, more heat is transported to the fuel side of the diffusion flame, thereby reducing the reaction rate on the fuel side of the flame and increasing the oxidizer leakage into the fuel side. When
, all the heat is transported to the oxidizer (fuel) side and therefore the flame sustains extremely large amount of fuel (oxidizer) leakage.[2]
The equation is, in some aspects, universal (also called as the canonical equation of the diffusion flame) since although Liñán derived the equation for stagnation point flow, assuming unity Lewis numbers for the reactants, the same equation is found to represent the inner structure for general laminar flamelets,[3][4][5] having arbitrary Lewis numbers.[6][7][8]