Loading AI tools
Five whys (or 5 whys) is an iterative interrogative technique used to explore the cause-and-effect relationships underlying a particular problem.[1] The primary goal of the technique is to determine the root cause of a defect or problem by repeating the question "why?" five times, each time directing the current "why" to the answer of the previous "why". The method asserts that the answer to the fifth "why" asked in this manner should reveal the root cause of the problem.[2]
The technique was described by Taiichi Ohno at Toyota Motor Corporation. Others at Toyota and elsewhere have criticized the five whys technique for being too basic and having an artificially shallow depth as a root cause analysis tool (see § Criticism).
An example of a problem is: the vehicle will not start.
- Why? – The battery is dead.
- Why? – The alternator is not functioning.
- Why? – The alternator belt has broken.
- Why? – The alternator belt was well beyond its useful service life and not replaced.
- Why? – The vehicle was not maintained according to the recommended service schedule (a root cause).
The questioning for this example could be taken further to a sixth, seventh, or higher level, but five iterations of asking why is generally sufficient to get to a root cause.[3] The key idea of the method is to encourage the troubleshooter to avoid assumptions and logic traps and instead trace the chain of causality in direct increments from the effect through any layers of abstraction to a root cause that still has some connection to the original problem. In this example, the fifth "why" suggests a broken process or an alterable behavior, which is indicative of reaching the root-cause level.
This nature of the answer to the fifth why in the example is an important aspect of the five why approach. The real root cause should point toward a process that is not working well or does not exist.[4]
In history, there are early examples of repeated questions to gain knowledge, such as in Plato's Meno. Aristotle developed a different approach with the four causes to develop four fundamental types of answer to the question ‘why?’. Gottfried Wilhelm Leibniz used iterative why questions in his letter to Magnus von Wedderkop in 1671, in which he applied elements of argumentation that he later used to solve the question of theodicy:
- Consider Pilate, who is damned. Why? (Cur Pilatus damnatus est?)
- Because he lacks faith. (Quia fidem non habuit.)
- Why does he lack it? (Cur fidem non habuit?)
- Because he lacked the will to be attentive. (Quia voluntatem attentandi non habuit.)
- Why does he lack this? (Cur voluntatem attentandi non habuit?)
- Because he did not understand the necessity of the matter, the usefulness of being attentive. (Quia utilitatem non intellexit.)
- Why did he not understand? (Cur non intellexit?)
- Beause the causes of understanding were lacking. (Quia causae intellegendi defuerunt.)
The modern technique was originally developed by Sakichi Toyoda and was used within the Toyota Motor Corporation during the evolution of its manufacturing methodologies. It is a major component of problem-solving training, delivered as part of the induction into the Toyota Production System. The architect of the Toyota Production System, Taiichi Ohno, described the five whys method as "the basis of Toyota's scientific approach by repeating why five times[5] the nature of the problem as well as its solution becomes clear."[2] The tool has seen use beyond Toyota, and is now used within Kaizen, lean manufacturing, lean construction and Six Sigma. The five whys were initially developed to understand why new product features or manufacturing techniques were needed, and was not developed for root cause analysis.
In other companies, it appears in other forms. Under Ricardo Semler, Semco practices "three whys" and broadens the practice to cover goal setting and decision-making.[6]
Two primary techniques are used to perform a five whys analysis:[7] the fishbone (or Ishikawa) diagram and a tabular format.
These tools allow for analysis to be branched in order to provide multiple root causes.[8]
The five whys technique has been criticized as a poor tool for root cause analysis. Teruyuki Minoura, former managing director of global purchasing for Toyota, criticized it as being too basic a tool to analyze root causes at the depth necessary to ensure an issue is fixed.[9] Reasons for this criticism include:
- Tendency for investigators to stop at symptoms rather than going on to lower-level root causes.
- Inability to go beyond the investigator's current knowledge – the investigator cannot find causes that they do not already know.
- Lack of support to help the investigator provide the right answer to "why" questions.
- Results are not repeatable – different people using five whys come up with different causes for the same problem.
- Tendency to isolate a single root cause, whereas each question could elicit many different root causes.
Medical professor Alan J. Card also criticized the five whys as a poor root cause analysis tool and suggested that it be abandoned because of the following reasons:[10]
- The artificial depth of the fifth why is unlikely to correlate with the root cause.
- The five whys is based on a misguided reuse of a strategy to understand why new features should be added to products, not a root cause analysis.
To avoid these issues, Card suggested instead using other root cause analysis tools such as fishbone or lovebug diagrams.[10]
- Eight disciplines problem solving
- Five Ws (information-gathering)
- Four causes
- Issue map
- Issue tree
- Root cause analysis
- Socratic method
- Why–because analysis
Wikiwand in your browser!
Seamless Wikipedia browsing. On steroids.
Every time you click a link to Wikipedia, Wiktionary or Wikiquote in your browser's search results, it will show the modern Wikiwand interface.
Wikiwand extension is a five stars, simple, with minimum permission required to keep your browsing private, safe and transparent.
