Euler's critical load
Formula to quantify column buckling under a given load / From Wikipedia, the free encyclopedia
Dear Wikiwand AI, let's keep it short by simply answering these key questions:
Can you list the top facts and stats about Euler's critical load?
Summarize this article for a 10 year old
Euler's critical load or Euler's buckling load is the compressive load at which a slender column will suddenly bend or buckle. It is given by the formula:[1]
where
- , Euler's critical load (longitudinal compression load on column),
- , Young's modulus of the column material,
- , second moment of area of the cross section of the column (area moment of inertia),
- , unsupported length of column,
- , column effective length factor
This formula was derived in 1744 by the Swiss mathematician Leonhard Euler.[2] The column will remain straight for loads less than the critical load. The critical load is the greatest load that will not cause lateral deflection (buckling). For loads greater than the critical load, the column will deflect laterally. The critical load puts the column in a state of unstable equilibrium. A load beyond the critical load causes the column to fail by buckling. As the load is increased beyond the critical load the lateral deflections increase, until it may fail in other modes such as yielding of the material. Loading of columns beyond the critical load are not addressed in this article.
Around 1900, J. B. Johnson showed that at low slenderness ratios an alternative formula should be used.