![cover image](https://wikiwandv2-19431.kxcdn.com/_next/image?url=https://upload.wikimedia.org/wikipedia/commons/thumb/0/08/Claymills_Pumping_Station_-_geograph.org.uk_-_2147565.jpg/640px-Claymills_Pumping_Station_-_geograph.org.uk_-_2147565.jpg&w=640&q=50)
Claymills Pumping Station
From Wikipedia, the free encyclopedia
Claymills Pumping Station is a restored Victorian sewage pumping station on the north side of Burton upon Trent, Staffordshire, England DE13 0DA. It was designed by James Mansergh and used to pump sewage to the sewage farm at Egginton.
![Thumb image](http://upload.wikimedia.org/wikipedia/commons/thumb/9/9f/Beam_%27D_engine%27_Claymills_Pumping_Station_-_geograph.org.uk_-_1507938.jpg/320px-Beam_%27D_engine%27_Claymills_Pumping_Station_-_geograph.org.uk_-_1507938.jpg)
![Thumb image](http://upload.wikimedia.org/wikipedia/commons/thumb/0/08/Claymills_Pumping_Station_-_geograph.org.uk_-_2147565.jpg/640px-Claymills_Pumping_Station_-_geograph.org.uk_-_2147565.jpg)
The main pumping plant consists of four Woolf compound, rotative, beam pumping engines. These are arranged in mirror image pairs, in two separate engine houses, with a central boiler house (containing five Lancashire boilers with economisers) and chimney. The engines were built in 1885 by Gimson and Company of Leicester. All the engines are similar, and the following description is limited to only one, but applicable to all.
The high-pressure cylinder is 24-inch bore by 6-foot stroke, and the low-pressure cylinder is 38-inch bore by 8-foot stroke. Steam is distributed by means of double beat 'Cornish' valves, mounted in upper and lower valve chests. The cylinders act on one end of the beam, via Watt's parallel motion. The beam itself is 26 feet 4 inches between end centres, 4 feet deep at the centre, weighs 13 tons and is carried on 12-inch-diameter (300 mm) bearings.
All four wolf compound Beam engines are now in steam (2023) around 14 weekends a year. The site now boasts a collection of 33 original running steam engines. The Four main pumping engines where all operational till 1969 when A & B engines where halted with C & D engines continuing till 1971. The engines where returned to steam in the following order : D engine (2001) C engine (2002) B engine (2017) and finally A engine (2023). The modern sewage works, run by Severn Trent Water, is alongside the pumping station.