Loading AI tools
Type of aircraft From Wikipedia, the free encyclopedia
The Blériot-SPAD S.91 was a light-weight fighter aircraft by the French aircraft manufacturer Blériot.
S.91 | |
---|---|
A SPAD S.91/2 on display at the Paris Aero Salon | |
Role | Fighter |
Manufacturer | Blériot |
Designer | André Herbemont |
First flight | 23 August 1927 |
Primary user | Spanish Republican Air Force |
Number built | 3 |
Developed into | Blériot-SPAD S.510 |
It was developed in response to a French government program for a light fighter aircraft. The S.91 was a single-seat earlier single-bay biplane that resembled pursuit aircraft produced by André Herbermont except for its wing profile. Duralumin and other light metals comprised a substantial amount of the framework; a single girder composed of out of duralumin tube supported the entirety of the fuselage aft of the cockpit. The majority of the covering was fabric. According to Blériot, it was a highly maneuverable aircraft and was also relatively easy to operate.
On 23 August 1927, the first prototype performed its maiden flight; it was lost in an accident during flight testing. The completion of a second prototype permitted the resumption of flight testing. Despite the French government having lost interest in the general concept, the company opted to continue work for a time, promoting the S.91 to various prospective foreign operators. During 1936, at least one of the surviving S.91 prototypes ended up in the Spanish Republican Air Force. While the S.91 would never go into quantity production, it would eventually be developed into the Blériot-SPAD S.510, which would be the last biplane produced by the French aeronautic industries.
The S.91 was a single-seat single-bay biplane developed towards the end of the 1920s by Blériot in order to meet the requirements of a French government program that sought a light fighter aircraft, which was referred to as "Jockey".[1] The French aircraft manufacturer Blériot was one of several domestic companies to develop a response to this requirement, opting to design a clean-sheet pursuit aircraft that was intended to be both relatively quick and manoeuvrable for the era.[2]
In terms of its general configuration, the S.91 bore a close resemblance to the earlier pursuit aircraft produced by André Herbermont (a lead aircraft designer at Blériot), the most prominent exception being the wing profile adopted.[3] Both the upper and lower wings had the same chord; the lower wings were rectangular and staggered aft while the upper wings possessed a clear sweep back. The upper wings were attached to the fuselage via a metal cabane that consisted of two sets of reversed N-shaped struts; the lower wings were attached to stubs which constituted integral elements of the fuselage.[3]
The wings of each half-cell were joined by a single strut and were braced using streamlined wires composed of high-resistance steel. Each of the lower wings were furnished with a relatively large aileron that was unbalanced.[3] The framework of the wing was entirely composed of duralumin, although the covering was made of fabric. Each wing had a pair of spars that were made up of open-work rectangular tubing that were free of both rivets and joints.[3] In the vicinity of the cockpit, the lower wings featured a sight cut away in order to improve the pilot’s downward visibility, which was claimed to be quite good. The pilot could operate a pair of machine guns, which remained entirely accessible throughout the flight.[4]
The framework of the fuselage was composed of light metals.[3] The forward section, which included all fuselage elements forward of the pilot’s cockpit, incorporated the aircraft’s power plant and consisted of open-work box girders. Aft of the cockpit, the fuselage formed a single girder that was constructed out of duralumin tubes.[3] All of the longerons, uprights, cross beams and diagonals were assembled using riveted gussets.[5] The horizontal empennage consisted of an adjustable stabilizer, the forward edge of which rested on the longerons of the upper fuselage; the rear edge of the empennage carried the adjusting apparatus. A two-part elevator formed a continuation of the stabilizer.[4] The vertical empennage consisted of a conventional fin and rudder. All of the tail planes were composed of duralumin and were covered with fabric.[4]
The S.91 was typically powered by a single Hispano-Suiza 12Hb V-12 engine, capable of generating up to 500hp.[4] Cooling was achieved using a Lamblin water-based radiators that was mounted on struts and positioned forward of the landing gear. The Lamblin-supplied oil radiator was located underneath the fuselage.[4] The aircraft was typically equipped with a removable fuel tank, which was positioned inside of the fuselage.[4]
The landing gear was formed of two V-shaped struts that consisted of box members in front and tubes aft.[4] It incorporated a hinged axle; each half-axle, which was relatively elevated in respect to the axis of the disk wheel, was likewise a box spar with a streamlined housing. The shock absorbers were located on the inside of the wheels.[4] The tail skid, which consisted of a spring with steel leaves, was hinged to the is sternpost of the fuselage and was attached at its upper end to a removable shock absorber. The skid could be replaced relatively easily by removing the pin that connected it with the stern post.[6]
On 23 August 1927, the first prototype performed its maiden flight. During the flight testing of this initial aircraft, the company announced that it had attained a maximum speed of 270 km (168 miles) per hour while at an altitude of 4Q00 m (13,123 ft.).[2] Furthermore, the prototype was claimed to be both highly manoeuvrable and relatively easy to operate as a result of its compact dimensions, favourable centring and the selected wing profile.[7] This prototype was destroyed in a crash; flight testing resumed following the completion of a second prototype. Even after the French government dropped interest in the program seeking a light fighter for the French Air Force, André Herbemont designed a further prototype with an inverted sesquiplane wing configuration.
While flight demonstrations were performed in both Romania and Greece in the hope of garnering sales, no orders for the type followed. André Herbemont would use his experience with the S.91 prototypes in order to develop the S.510, another biplane fighter which would go into production and would be later used by the French Air Force.
In 1936, at least one of the surviving S.91 prototypes ended up in the Spanish Republican Air Force.[8]
Data from Jane's all the World's Aircraft 1928,[19] Aviafrance:S.91 Leger[9]
General characteristics
Performance
Armament
Related development
Related lists
Seamless Wikipedia browsing. On steroids.
Every time you click a link to Wikipedia, Wiktionary or Wikiquote in your browser's search results, it will show the modern Wikiwand interface.
Wikiwand extension is a five stars, simple, with minimum permission required to keep your browsing private, safe and transparent.