Additive category
Preadditive category that admits all finitary products From Wikipedia, the free encyclopedia
In mathematics, specifically in category theory, an additive category is a preadditive category C admitting all finitary biproducts.
There are two equivalent definitions of an additive category: One as a category equipped with additional structure, and another as a category equipped with no extra structure but whose objects and morphisms satisfy certain equations.
Via preadditive categories
A category C is preadditive if all its hom-sets are abelian groups and composition of morphisms is bilinear; in other words, C is enriched over the monoidal category of abelian groups.
In a preadditive category, every finitary product (including the empty product, i.e., a final object) is necessarily a coproduct (or initial object in the case of an empty diagram), and hence a biproduct, and conversely every finitary coproduct is necessarily a product (this is a consequence of the definition, not a part of it).
Thus an additive category is equivalently described as a preadditive category admitting all finitary products, or a preadditive category admitting all finitary coproducts.
Via semiadditive categories
We give an alternative definition.
Define a semiadditive category to be a category (note: not a preadditive category) which admits a zero object and all binary biproducts. It is then a remarkable theorem that the Hom sets naturally admit an abelian monoid structure. A proof of this fact is given below.
An additive category may then be defined as a semiadditive category in which every morphism has an additive inverse. This then gives the Hom sets an abelian group structure instead of merely an abelian monoid structure.
Generalization
More generally, one also considers additive R-linear categories for a commutative ring R. These are categories enriched over the monoidal category of R-modules and admitting all finitary biproducts.
The original example of an additive category is the category of abelian groups Ab. The zero object is the trivial group, the addition of morphisms is given pointwise, and biproducts are given by direct sums.
More generally, every module category over a ring R is additive, and so in particular, the category of vector spaces over a field K is additive.
The algebra of matrices over a ring, thought of as a category as described below, is also additive.
Let C be a semiadditive category, so a category having all finitary biproducts. Then every hom-set has an addition, endowing it with the structure of an abelian monoid, and such that the composition of morphisms is bilinear.
Moreover, if C is additive, then the two additions on hom-sets must agree. In particular, a semiadditive category is additive if and only if every morphism has an additive inverse.
This shows that the addition law for an additive category is internal to that category.[1]
To define the addition law, we will use the convention that for a biproduct, pk will denote the projection morphisms, and ik will denote the injection morphisms.
For each object A, we define:
- the diagonal morphism ∆: A → A ⊕ A by ∆ = i1 + i2;
- the codiagonal morphism ∇: A ⊕ A → A by ∇ = p1 + p2.
Then, for k = 1, 2, we have pk ∘ ∆ = 1A and ∇ ∘ ik = 1A.
Next, given two morphisms αk: A → B, there exists a unique morphism α1 ⊕ α2: A ⊕ A → B ⊕ B such that pl ∘ (α1 ⊕ α2) ∘ ik equals αk if k = l, and 0 otherwise.
We can therefore define α1 + α2 := ∇ ∘ (α1 ⊕ α2) ∘ ∆.
This addition is both commutative and associative. The associativity can be seen by considering the composition
We have α + 0 = α, using that α ⊕ 0 = i1 ∘ α ∘ p1.
It is also bilinear, using for example that ∆ ∘ β = (β ⊕ β) ∘ ∆ and that (α1 ⊕ α2) ∘ (β1 ⊕ β2) = (α1 ∘ β1) ⊕ (α2 ∘ β2).
We remark that for a biproduct A ⊕ B we have i1 ∘ p1 + i2 ∘ p2 = 1. Using this, we can represent any morphism A ⊕ B → C ⊕ D as a matrix.
Given objects A1, ..., An and B1, ..., Bm in an additive category, we can represent morphisms f: A1 ⊕ ⋅⋅⋅ ⊕ An → B1 ⊕ ⋅⋅⋅ ⊕ Bm as m-by-n matrices
- where
Using that ∑k ik ∘ pk = 1, it follows that addition and composition of matrices obey the usual rules for matrix addition and multiplication.
Thus additive categories can be seen as the most general context in which the algebra of matrices makes sense.
Recall that the morphisms from a single object A to itself form the endomorphism ring End A. If we denote the n-fold product of A with itself by An, then morphisms from An to Am are m-by-n matrices with entries from the ring End A.
Conversely, given any ring R, we can form a category Mat(R) by taking objects An indexed by the set of natural numbers (including 0) and letting the hom-set of morphisms from An to Am be the set of m-by-n matrices over R, and where composition is given by matrix multiplication.[2] Then Mat(R) is an additive category, and An equals the n-fold power (A1)n.
This construction should be compared with the result that a ring is a preadditive category with just one object, shown here.
If we interpret the object An as the left module Rn, then this matrix category becomes a subcategory of the category of left modules over R.
This may be confusing in the special case where m or n is zero, because we usually don't think of matrices with 0 rows or 0 columns. This concept makes sense, however: such matrices have no entries and so are completely determined by their size. While these matrices are rather degenerate, they do need to be included to get an additive category, since an additive category must have a zero object.
Thinking about such matrices can be useful in one way, though: they highlight the fact that given any objects A and B in an additive category, there is exactly one morphism from A to 0 (just as there is exactly one 0-by-1 matrix with entries in End A) and exactly one morphism from 0 to B (just as there is exactly one 1-by-0 matrix with entries in End B) – this is just what it means to say that 0 is a zero object. Furthermore, the zero morphism from A to B is the composition of these morphisms, as can be calculated by multiplying the degenerate matrices.
A functor F: C → D between preadditive categories is additive if it is an abelian group homomorphism on each hom-set in C. If the categories are additive, then a functor is additive if and only if it preserves all biproduct diagrams.
That is, if B is a biproduct of A1, ... , An in C with projection morphisms pk and injection morphisms ij, then F(B) should be a biproduct of F(A1), ... , F(An) in D with projection morphisms F(pj) and injection morphisms F(ij).
Almost all functors studied between additive categories are additive. In fact, it is a theorem that all adjoint functors between additive categories must be additive functors (see here). Most of the interesting functors studied in category theory are adjoints.
Generalization
When considering functors between R-linear additive categories, one usually restricts to R-linear functors, so those functors giving an R-module homomorphism on each hom-set.
- A pre-abelian category is an additive category in which every morphism has a kernel and a cokernel.
- An abelian category is a pre-abelian category such that every monomorphism and epimorphism is normal.
Many commonly studied additive categories are in fact abelian categories; for example, Ab is an abelian category. The free abelian groups provide an example of a category that is additive but not abelian.[3]
Wikiwand in your browser!
Seamless Wikipedia browsing. On steroids.
Every time you click a link to Wikipedia, Wiktionary or Wikiquote in your browser's search results, it will show the modern Wikiwand interface.
Wikiwand extension is a five stars, simple, with minimum permission required to keep your browsing private, safe and transparent.
