Datei:STS-132_Atlantis_OBSS_installation.jpg
aus Wikipedia, der freien encyclopedia
![Datei:STS-132 Atlantis OBSS installation.jpg](http://upload.wikimedia.org/wikipedia/commons/thumb/8/8b/STS-132_Atlantis_OBSS_installation.jpg/800px-STS-132_Atlantis_OBSS_installation.jpg)
Originaldatei (3.000 × 2.008 Pixel, Dateigröße: 3,77 MB, MIME-Typ: image/jpeg)
Diese Datei und die Informationen unter dem roten Trennstrich werden aus dem zentralen Medienarchiv Wikimedia Commons eingebunden.
Beschreibung
BeschreibungSTS-132 Atlantis OBSS installation.jpg |
English: In Orbiter Processing Facility 1 at NASA's Kennedy Space Center in Florida, technicians install the orbiter boom sensor system, or OBSS, in space shuttle Atlantis' payload bay across from the remote manipulator system arm. The OBSS' inspection boom assembly, or IBA, is removed from the arm every other processing flow for a detailed inspection. After five consecutive flights, all IBA internal components are submitted to a thorough electrical checkout in the Remote Manipulator System Lab. The 50-foot-long OBSS attaches to the end of the shuttle’s robotic arm and supports the cameras and laser systems used to inspect the shuttle’s thermal protection system while in space. Atlantis is next slated to deliver an Integrated Cargo Carrier and Russian-built Mini Research Module to the International Space Station on the STS-132 mission. Launch is targeted for May 14 |
Datum | |
Quelle | |
Urheber | NASA/Jim Grossmann |
![]() |
Diese Mediendatei wurde vom Kennedy Space Center der US-amerikanischen National Aeronautics and Space Administration (NASA) unter der Datei-ID KSC-2010-1316 kategorisiert. Diese Markierung zeigt nicht den Urheberrechtsstatus des zugehörigen Werks an. Es ist in jedem Falle zusätzlich eine normale Lizenzvorlage erforderlich. Siehe Commons:Lizenzen für weitere Informationen. Sprachen:
العربية ∙ беларуская (тарашкевіца) ∙ български ∙ català ∙ čeština ∙ dansk ∙ Deutsch ∙ English ∙ español ∙ فارسی ∙ français ∙ galego ∙ magyar ∙ հայերեն ∙ Bahasa Indonesia ∙ italiano ∙ 日本語 ∙ македонски ∙ മലയാളം ∙ Nederlands ∙ polski ∙ português ∙ русский ∙ sicilianu ∙ slovenščina ∙ Türkçe ∙ українська ∙ 简体中文 ∙ 繁體中文 ∙ +/− |
Lizenz
Public domainPublic domainfalsefalse |
![]() |
Diese Datei ist gemeinfrei (public domain), da sie von der NASA erstellt worden ist. Die NASA-Urheberrechtsrichtlinie besagt, dass „NASA-Material nicht durch Urheberrecht geschützt ist, wenn es nicht anders angegeben ist“. (NASA-Urheberrechtsrichtlinie-Seite oder JPL Image Use Policy). | ![]() |
![]() |
Warnung:
|
Kurzbeschreibungen
In dieser Datei abgebildete Objekte
Motiv
18. Januar 2010
Dateiversionen
Klicke auf einen Zeitpunkt, um diese Version zu laden.
Version vom | Vorschaubild | Maße | Benutzer | Kommentar | |
---|---|---|---|---|---|
aktuell | 00:25, 23. Jan. 2010 | ![]() | 3.000 × 2.008 (3,77 MB) | Myself488 | higher resolution |
07:35, 22. Jan. 2010 | ![]() | 720 × 482 (446 KB) | Kurun | {{Information |Description={{en|1=In Orbiter Processing Facility 1 at NASA's Kennedy Space Center in Florida, technicians install the orbiter boom sensor system, or OBSS, in space shuttle Atlantis' payload bay across from the remote manipulator system arm |
Dateiverwendung
Die folgende Seite verwendet diese Datei:
Metadaten
Diese Datei enthält weitere Informationen (beispielsweise Exif-Metadaten), die in der Regel von der Digitalkamera oder dem verwendeten Scanner stammen. Durch nachträgliche Bearbeitung der Originaldatei können einige Details verändert worden sein.
_error | 0 |
---|