From Wikipedia, the free encyclopedia
Denne skabelon bruger Lua: |
Denne skabelon bruges på ca. 19.000 sider, og derfor vil ændringer blive bemærket af mange. Vær venlig at afprøve enhver ændring i skabelonens /sandkasse eller /test-undersider, eller i din egen brugerunderside. Du bør også overveje at diskutere ændringer på diskussionssiden før du implementerer dem. |
This template generates a location map as a composite image consisting of a map and a location mark. Optionally a label and caption can be added.
Map image files are not accessed directly but by using an auxiliary map definition. For example, if the first unnamed parameter supplied to this template is "Japan", then this template uses the entry for Japan in Modul:Location map/data/Japan if it exists, or {{Location map Japan}} otherwise, one of which contains the data needed to generate the composite image.
caption
causes the map to be displayed as a thumbnail image. If this parameter is not declared, the template will generate a default caption.px
. Using width=200px
will usually cause a very large map to be displayed. Use width=200
.For brug i infobokse se eksempel med bemærkninger på Skabelon:Infoboks togstation
Decimal degrees | Degrees, minutes, seconds | With {{Coord}} (usually for infoboxes) |
Wikidata | |||
---|---|---|---|---|---|---|
{{Location map | {{{1}}} | width = | float = | border = | caption = | alt = | relief = | AlternativeMap = | overlay_image = | label = | label_size = | position = | background = | mark = | marksize = | link = | lat_deg = | lon_deg = }} |
{{Location map | {{{1}}} | width = | float = | border = | caption = | alt = | relief = | AlternativeMap = | overlay_image = | label = | label_size = | position = | background = | mark = | marksize = | link = | lat_deg = | lat_min = | lat_sec = | lat_dir = | lon_deg = | lon_min = | lon_sec = | lon_dir = }} |
{{Location map | {{{1}}} | width = | float = | border = | caption = | alt = | relief = | AlternativeMap = | overlay_image = | label = | label_size = | position = | background = | mark = | marksize = | coordinates = }} |
{{Location map | {{{1}}} | width = | float = | border = | caption = | alt = | relief = | AlternativeMap = | overlay_image = | label = | label_size = | position = | background = | mark = | marksize = }} |
Map display parameters | |
---|---|
Parameter | Description |
{{{1}}} |
Required. Use the name of the map as the first unnamed parameter. For example, specifying England will use the values for England in Modul:Location map/data/England if it exists, or {{Location map England}} otherwise. See the examples below. Multiple maps can be shown by providing a list of map names separated by #. For multiple maps, the first is shown by default, a reader can select the others with radio buttons. |
width |
Determines the width of the map in pixels, overriding any default values. Do not include px , for example: width=300 , not width=300px . |
default_width |
Determines the default width of the map in pixels, intended for use by templates e.g. place infoboxes. The default value is 240. Do not include px . This value will be multiplied by the defaultscale parameter specified in individual map templates, if it exists, in order to achieve an appropriate size for vertical maps. For example, if default_width=200 is given, a map of Thailand will be displayed with a width of 200 * 0.57 = 114 pixels (as specified in Skabelon:Location map Thailand). |
float |
Specifies the position of the map on the page. Valid values are left , right , center and none . The default is right . |
border |
Specifies the color of the 1px map border. The default is lightgrey (see web colors). If set to none , no border will be generated. This parameter is seldom used. |
caption |
The text of a caption to be displayed below the map. Specifying a caption will cause the map to be displayed with a frame. If caption is defined but is not assigned a value, the map will not be framed and no caption will be displayed. If caption is not defined, the map will not be framed and a default caption will be generated. The default caption is created from the label parameter (or the current page name if label not defined) and the name parameter from map definition template. See the examples below. |
alt |
Alt text for map; used by screen readers, see Wikipedia:ALT. |
relief |
Any non-blank value (1, yes, etc.) will cause the template to display the map specified in the map definition template as image1 , which is usually a relief map. See the example at Location map+/relief. |
AlternativeMap |
Allows the use of an alternative map. The image must have the same edge coordinates as the location map template. See the example at Location map+/AlternativeMap. |
overlay_image |
Allows an overlay to be superimposed on the map. This parameter is seldom used. See the example at Location map+/overlay. |
Label and mark parameters If no coordinates are specified, the template will try to get them from the page's Wikidata item. | |
Parameter | Description |
label |
The text of the label to display next to the mark. A wiki link can be used. The default if not specified is no label, just the marker. |
label_size |
The font size to use for the label, given as a percentage of the normal font size (<100 = smaller, >100 = larger). The default is 90. Do not include % , for example: label_size=80 , not label_size=80% . If set to 0, the label is only displayed when the user hovers over the mark. |
label_width |
The width to use for the label, given as an em size. The default is 6. Do not include em , for example: label_width=7 , not label_width=7em . |
position |
The position of the label relative to the mark. Valid values are left , right , top ,bottom and none . This defaults to either left or right , depending on the coordinates of the marker and its position relative to the right border of the map image. When position=none any defined label will not be displayed with the mark, but it will be used to create the default caption. |
background |
The background color to use for the label. See Web colors. The default is no background color, which shows the map image behind the label. |
mark |
The name of an image to display as the mark. The default is Red pog.svg (). See examples at Commons:Location markers and Commons:Category:Map icons. |
marksize |
The size of the mark in pixels. The default is 8. Do not include px , for example: marksize=10 , not marksize=10px . |
link |
Specifies a wiki link which will be followed if the reader clicks on the mark. Do not include [[]] , for example: link=Yellowstone National Park , not link=[[Yellowstone National Park]] . |
coordinates |
The coordinates in {{Coord}} format. While not recommended, if you want to waste time you can also enter them in decimal degrees (e.g. 48.067°N 12.863°E ). You shouldn't need to, though. |
lat_deg |
The degrees of latitude. This value can be specified using decimal degrees and when this format is used minutes and seconds should not be specified. |
lat_min |
The minutes of latitude. |
lat_sec |
The seconds of latitude. Usually not necessary. |
lat_dir |
N if north (default value) or S for south of the Equator. Other values will be disregarded. Not required if using signed decimal degrees (i.e. negative numbers for southern latitude). |
lon_deg |
The degrees of longitude. This value can be specified using decimal degrees and when this format is used minutes and seconds should not be specified. |
lon_min |
The minutes of longitude. |
lon_sec |
The seconds of longitude. Usually not necessary. |
lon_dir |
E for east (default value) or W for west of the Prime Meridian. Other values will be disregarded. Not required if using signed decimal degrees (i.e. negative numbers for western longitude). |
There are over 1000 maps available. To find other maps:
See Creating a new map definition.
Note: When a label is not specified, the default caption is "Page name (Map name)", so if this example was viewed on a page named Pag, the default caption would be "Pag (Croatia)". Likewise, on a page named Pag (town), the default caption would be "Pag (town) (Croatia)".
{{Location map | Croatia | alt = Pag is on an island. | lat_deg = 44.44 | lon_deg = 15.05 }}
Note: When a label is specified, the default caption is "Label text (Map name)", seen as "Pag (Croatia)" in this example.
{{Location map | Croatia | width = 200 | float = right | alt = Pag is on an island. | label = Pag | position = right | mark = Green pog.svg <!--green dot--> | lat_deg = 44 | lat_min = 26 <!-- default: lat_dir = N --> | lon_deg = 15 | lon_min = 3 <!-- default: lon_dir = E --> }}
When |position=none
, the label text is not displayed next to the mark but is still used in the default caption and default alt text.
{{Location map | Croatia | width = 200 | float = right | label = Pag | position = none | mark = Green pog.svg <!--green dot--> | lat_deg = 44 | lat_min = 26 <!-- default: lat_dir = N --> | lon_deg = 15 | lon_min = 3 <!-- default: lon_dir = E --> }}
{{Location map | Croatia | width = 200 | float = right | caption = | alt = Rimini in Italy (outside the map) | lat_deg = 44.05 | lon_deg = 12.57 <!--outside map's left border at 13.1--> | outside = 1 <!-- we're aware the point is outside the map, so suppress the warning category --> | label = Rimini | position = right }}
{{Location map | Italien | width = 200 | float = right | caption = Location of Rimini in Italy | alt = Map of Italy with mark showing location of Rimini | label = Rimini | label_size = 150 <!--150% of normal size--> | position = bottom | background = orange | mark = Orange_pog.svg | marksize = 12 <!--size in pixels--> | lat_deg = 44.05 | lon_deg = 12.57 }}
{{Location map | Italien | AlternativeMap = Italy location map.svg | width = 200 | float = right | caption = Location of Rome in Italy | alt = Map of Italy with mark showing location of Rome | label = Rom | lat_deg = 41.9 | lon_deg = 12.5 }}
Also demonstrates automatic positioning of label to the left, due to far right position of mark.
{{Location map | Nepal | relief = yes | caption = Location of Biratnagar Airport in Nepal | alt = Biratnagar Airport is located in southeastern Nepal | label = Biratnagar | mark = Airplane silhouette.svg | marksize = 10 | lat_deg = 26 | lat_min = 28 | lat_sec = 53 | lat_dir = N | lon_deg = 87 | lon_min = 15 | lon_sec = 50 | lon_dir = E }}
{{Location map | Nepal | relief = | caption = Location of Biratnagar Airport in Nepal | alt = Biratnagar Airport is located in southeastern Nepal | label = Biratnagar | mark = Airplane silhouette.svg | marksize = 10 | lat_deg = 26 | lat_min = 28 | lat_sec = 53 | lat_dir = N | lon_deg = 87 | lon_min = 15 | lon_sec = 50 | lon_dir = E }}
{{Location map | UK Scotland#UK | relief = 1 | width = 180 | float = right | caption = Lockerbie in Scotland, UK | alt = Lockerbie is in southern Scotland. | label = Lockerbie | mark = Blue_pog.svg | marksize = 9 | lat_deg = 55 | lat_min = 07 | lat_sec = 16 | lat_dir = N | lon_deg = 03 | lon_min = 21 | lon_sec = 19 | lon_dir = W }}
{{Location map | Fiji | width = 180 | float = right | label = Suva | position = right | background = yellow | mark = Locator_Dot.png | marksize = 7 | lat_deg = 18 | lat_min = 8 | lat_sec = 0 | lat_dir = S | lon_deg = 178 | lon_min = 26 | lon_sec = 0 | lon_dir = E }}
Location map
Parameter | Beskrivelse | Type | Status | |
---|---|---|---|---|
Map name(s) | 1 | The name of the map to be used. Multiple maps can be provided as a list separated by # | Streng | påkrævet |
Map width | width | Determines the width of the map in pixels, overriding any default values. Do not include "px", for example: "300", not "300px". | Tal | valgfri |
Default width | default_width | Determines the default width of the map in pixels, intended for use by templates such as infoboxes. The default value is 240. Do not include "px". This value will be multiplied by the defaultscale parameter specified in individual map templates, if it exists, in order to achieve an appropriate size for vertical maps. | Tal | valgfri |
Position | float | Specifies the position of the map on the page. Valid values are left, right, center and none. The default is right. | Streng | valgfri |
Border color | border | Specifies the color of the map border. If set to none, no border will be generated. | Streng | valgfri |
Map caption | caption | The text of a caption to be displayed below the map. If caption is defined but is not assigned a value, the map will not be framed and no caption will be displayed. If caption is not defined, the map will not be framed and a default caption will be generated. | Streng | valgfri |
Alt text | alt | Alt text for map; used by screen readers. | Streng | valgfri |
Alternative map from template | relief | Any non-blank value (1, yes, etc.) will cause the template to display the map specified in the map definition template as image1, which is usually a relief map. | Streng | valgfri |
Alternative map not from template | AlternativeMap | Allows the use of an alternative map. The image must have the same edge coordinates as the map template. | Streng | valgfri |
Overlay image | overlay_image | Allows an overlay to be superimposed on the map. This parameter is seldom used. | Streng | valgfri |
Marker label | label | The text of the label to display next to the mark. A wiki link can be used. | Streng | valgfri |
Label size | label_size | The font size to use for the label, given as a percentage of the normal font size. Do not include "%". | Tal | valgfri |
Label width | label_width | The width to use for the label, given as an em size. Do not include "em". | Tal | valgfri |
Label position | position | The position of the label relative to the mark. Valid values are left, right, top, bottom and none. This defaults to either left or right, depending on the coordinates of the marker and its position relative to the right border of the map image. When position=none any defined label will not be displayed with the mark, but it will be used to create the default caption. | Streng | valgfri |
Label background | background | The background color to use for the label. | Streng | valgfri |
Marker image | mark | The name of an image to display as the marker. | Streng | valgfri |
Marker size | marksize | The size of the mark in pixels. Do not include "px". | Tal | valgfri |
Marker link | link | Specifies a wiki link which will be followed if the reader clicks on the mark. | Streng | valgfri |
Coordinates | coordinates | Coordinates, usually in {{Coord}} format. However, they can also be typed out in decimal degrees (with no spaces between ° and N/S/E/W).
| Streng | valgfri |
Latitude degrees | lat_deg | The degrees of latitude. This value can be specified using decimal degrees. When this format is used minutes and seconds should not be specified. | Tal | påkrævet |
Latitude minutes | lat_min | The minutes of latitude. | Tal | valgfri |
Latitude seconds | lat_sec | The seconds of latitude. | Tal | valgfri |
Latitude direction | lat_dir | N if north or S for south of the Equator. Not required if using signed decimal degrees. | Streng | valgfri |
Longitude degrees | lon_deg | The degrees of longitude. This value can be specified using decimal degrees. When this format is used minutes and seconds should not be specified. | Tal | påkrævet |
Longitude minutes | lon_min | The minutes of longitude. | Tal | valgfri |
Longitude seconds | lon_sec | The seconds of longitude. | Tal | valgfri |
Longitude direction | lon_dir | E for east or W for west of the Prime Meridian. Not required if using signed decimal degrees. | Streng | valgfri |
Wikimedia Commons har medier relateret til: |
Skabelon:Location map/doc/See also infobox templates
Seamless Wikipedia browsing. On steroids.
Every time you click a link to Wikipedia, Wiktionary or Wikiquote in your browser's search results, it will show the modern Wikiwand interface.
Wikiwand extension is a five stars, simple, with minimum permission required to keep your browsing private, safe and transparent.