![cover image](https://wikiwandv2-19431.kxcdn.com/_next/image?url=https://upload.wikimedia.org/wikipedia/commons/thumb/6/6b/Smt_closeup.jpg/640px-Smt_closeup.jpg&w=640&q=50)
Surface-mount technology
Method for producing electronic circuits / From Wikipedia, the free encyclopedia
Surface-mount technology (SMT), originally called planar mounting,[1] is a method in which the electrical components are mounted directly onto the surface of a printed circuit board (PCB).[2] An electrical component mounted in this manner is referred to as a surface-mount device (SMD). In industry, this approach has largely replaced the through-hole technology construction method of fitting components, in large part because SMT allows for increased manufacturing automation which reduces cost and improves quality.[3] It also allows for more components to fit on a given area of substrate. Both technologies can be used on the same board, with the through-hole technology often used for components not suitable for surface mounting such as large transformers and heat-sinked power semiconductors.
![Thumb image](http://upload.wikimedia.org/wikipedia/commons/thumb/6/6b/Smt_closeup.jpg/640px-Smt_closeup.jpg)
![Thumb image](http://upload.wikimedia.org/wikipedia/commons/thumb/2/29/Big_SMD_capacitor_2.jpg/640px-Big_SMD_capacitor_2.jpg)
![Thumb image](http://upload.wikimedia.org/wikipedia/en/thumb/f/fa/SMDcompared.jpeg/640px-SMDcompared.jpeg)
An SMT component is usually smaller than its through-hole counterpart because it has either smaller leads or no leads at all. It may have short pins or leads of various styles, flat contacts, a matrix of solder balls (BGAs), or terminations on the body of the component.