![cover image](https://wikiwandv2-19431.kxcdn.com/_next/image?url=https://upload.wikimedia.org/wikipedia/commons/thumb/7/73/Hilofilter.agr.jpg/640px-Hilofilter.agr.jpg&w=640&q=50)
Electronic filter
Electronic device / From Wikipedia, the free encyclopedia
This article is about lumped-element electrical filters. For distributed-element types, see Distributed-element filter. For other filter technologies, see Filter (signal processing) § Technologies.
Electronic filters are a type of signal processing filter in the form of electrical circuits. This article covers those filters consisting of lumped electronic components, as opposed to distributed-element filters. That is, using components and interconnections that, in analysis, can be considered to exist at a single point. These components can be in discrete packages or part of an integrated circuit.
![]() | This article includes a list of general references, but it lacks sufficient corresponding inline citations. (March 2013) |
![](http://upload.wikimedia.org/wikipedia/commons/thumb/7/73/Hilofilter.agr.jpg/640px-Hilofilter.agr.jpg)
Electronic filters remove unwanted frequency components from the applied signal, enhance wanted ones, or both. They can be:
- passive or active
- analog or digital
- high-pass, low-pass, band-pass, band-stop (band-rejection; notch), or all-pass.
- discrete-time (sampled) or continuous-time
- linear or non-linear
- infinite impulse response (IIR type) or finite impulse response (FIR type)
The most common types of electronic filters are linear filters, regardless of other aspects of their design. See the article on linear filters for details on their design and analysis.